Metal roofing: Major issues of metal roof installation in Charlotte, NC

Metal roofing is indeed a very popular roofing choice in Charlotte NC, but it comes with its issue. Metal is more preferred because of its simplicity, durability, and the beauty it adds to your roof. While metal roofs are very good for both homeowners and roof contractors, when improperly installed, they can cause deep problems for you.

Knowing these installation-related problems will help you know what to expect when installing a new roof, letting you make provisions for solutions. In this article, you will learn about the major installation issues associated with metal roofing and how to fix them.

Common metal roof installation issues

1. Improperly tightened fasteners

In most installation cases, fasteners are either over tightened or under tightened. Properly installed fasteners play a very critical role in the efficiency of a metal roofing system. This is because they penetrate through the metal roofs, the underlayment, and the roof deck. Overtightened fasteners will compress the washers and cause water to pool over a waterproof roof. They cause compressions or “dimples” to form on the metal panels, thus allowing water to pool and infiltrate the attic or the ceiling of your house.

Likewise, under tightened fasteners or screws are very loose and unable to secure the panels in place. This leads to a short lifespan for the metal panels and fasteners too.

How to fix it

Metal roofing installation requires skills and expertise. The screws or fasteners must be straight and firm when installing. They should be strong enough to securely hold the panels in place but not too tight that it causes dimples or compressions.

2. Rust stains caused by metal shavings

The process of installing a metal roof also involves drilling through the metal panel so it can be attached to the substrate. The drilling caused metal shavings to form and these can cause rust stains on the sheets. The rust stains and corrosion formed can reduce the lifespan of the roof.

How to fix it

Always make sure to clean up after the installation. You can either sweep off the metal shavings or blow them away.

3. Delay related to workers injuries

Metal roofing installation requires skills and expertise. To get the best results, the installation process must be done by a professional. Work-related injuries are common, especially for inexperienced roof installers. For this, safety is very crucial in a worksite. Injured workers can only get very little to no job done properly.

How to fix it

Roof installers must put on protective gear and make sure they are balanced while on the roof. Taking precautionary measures ensures there are no accidents.

Charlotte’s #1 metal roofing contractor

A professional roofing contractor can easily identify these common installation issues and make sure they are taken care of. He ensures the installation process is smooth and effective, saving you more money in the long term.

The best way to prevent such installation issues from occurring is to hire the services of a professional roofing company. With their experience and skills, they will bring the best out of your metal roofing system either for your residential building or commercial building. Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte NC and surrounding areas.