Types of Residential Roofing offered by Advanced Roofing and Exteriors:

 

Types of Project

Types of Roofing

  • Asphalt Shingles (3 tab, Architectural)
  • Metal Roofing (Panels and Shingles)
  • Cedar Shakes & Shingles
  • Natural Slate Roofing
  • Clay & Concrete Tile Roofing
  • Synthetic (Recycled) Slate and Cedar
  • Single-Ply Flat Roof – TPO and EPDM

Shingles

The most popular residential roofing system, asphalt shingles are available from several manufacturers in a wide range of styles and colors, with warranties ranging from 20 years to lifetime.  The most basic and economical shingles are typically referred to “3-tab” shingles, as each shingle is manufactured to give the appearance of three separate shingle tabs.

An upgraded and increasingly more popular product is the architectural or dimensional shingle which uses a thicker shingle to provide a three-dimensional appearance on your roof.  Beyond these, each shingle manufacturer produces their own premium, designer or luxury lines of shingles aimed at meeting the needs and styles of almost any homeowner or home design style.

Metal Roofing

Although metal roofing is more expensive than asphalt and composite shingles, it lasts much longer, with a life of 40-60 years. It is also available in copper and several colors of 24 gauge steel or 0.032 aluminum.  The availability of multiple panel profiles, including 5V crimp and standing seam, ensures you will be able to find a style to meet your project needs.

Hard Roofs: Clay and Concrete Tile

Clay tile is produced by baking molded clay into tile, concrete tile by combining Portland cement, sand and water.   Both systems produce some of the most durable roofs, which with proper maintenance could last for 100 years or more.  Although at increased costs, the unique and varying profiles of tile roofs provide a historic appearance that could greatly increase your houses curb appeal and value.

Wood Shakes and Shingles

Wood shakes and wood shingles are manufactured from western red cedar, cypress, pine and redwood trees.  Their resistance to decay, moisture and insects allows for little to no maintenance, while lasting 30-40 years.

Slate

Roofing slate is a dense, durable, naturally occurring material that is essentially nonabsorbent.  The color of slate is determined by its chemical and mineral composition. Because these factors differ in various regions, roofing slate can be obtained in a variety of colors, sizes and shapes.

Synthetic

Synthetic roofing products are manufactured products made to mimic asphalt shingles, concrete tile, clay tile, metal panels, slate, wood shakes and wood shingles.  These products contain recycled plastic and/or rubber as a key ingredient and are at times more affordable than their “real” counterparts due to savings in manufacturing or labor installation costs.

Single-Ply Flat Roof – TPO and EPDM

TPO (Thermoplastic Olefin) and EPDM (Ethylene Propylene Diene Monomer) are factory-manufactured sheet membranes, available in varying thicknesses and sheet sizes and installed either fully adhered, mechanically attached or held down with ballast.  Although available in different colors, TPO is typically a white membrane. In most instances EPDM will be black, but is also available white.