Roof installers in Charlotte install roof shingles

Roof installers can help you with the installation of roof shingles. Shingle is a flexible and lightweight roofing material composed of a sheet of asphalt or bitumen felt. Perfect for DIY and small area roofing, the shingle adapts to all types of slopes greater than 20%. The shingle is mainly used for DIY because it is very easy to set up.

Steps for installation of roof shingles

 Here are the steps for a successful installation of roof shingles.

Preparatory work before laying:

The asphalt shingles are installed on a flat surface of wood greater than or equal to 14 mm wide. Remember to treat your wood with an insecticide and fungicide product before starting the installation of your shingle roof. Indeed, once installed, it will no longer be possible (or very difficult) to apply these protective products.

To best prepare for the installation, you can grid your roof using a marking line. The marking should be parallel to the gutter and should start 20cm from the edge of the roof. You will need to grid your roof by drawing a perpendicular line then draw lines, parallel to the first horizontal line. Ideally, space these lines 15cm. This step may seem restrictive, but it is necessary to obtain a uniform installation of the shingle on the roof.

Place your Shingle:

The installation of the roof shingles is always done from bottom to top. Consider installing a zinc strip around the edges of the roof to protect the coating from rainwater and other bad weather that tends to deteriorate the roofs.

Once the application of this zinc strip is made, you can then start laying the shingle:

  • First, apply the first strip of shingle upside down.
  • Then, double it by putting a second layer superimposed in the right direction this time.
  • Then move on to the second row and so on.

The bands are to be stapled or nailed to the previous row in five points. It is important to nail the shingle strips from left to right throughout the application to avoid tearing. When installing the shingle, you must ensure that only the patterns of the slate appear.

If after this tutorial you still have trouble visualizing how to install the shingles don’t panic! The material is usually accompanied by a shingle installation guide at the time of purchase explaining the installation method step by step.

It is also advisable to carefully follow the installation instructions indicated on the instructions because the installation methods may vary slightly depending on the brand of shingle you have purchased.

Tips for a successful installation

  • Make sure you have the right equipment: tools, protection, etc.
  • If you opt for nailing your shingles, a nail gun will be recommended, and you will get a much more precise job than with a hammer.
  • A glue gun can also be of great help. You will be able to glue the sides of each shingle point by point in order to avoid slate lifting as much as possible in the event of a strong wind.

Getting the best roof installers in Charlotte and Concord, NC

In this article, you’ve learned how to install roof shingles on your buildings.

Despite these tips, it is best advised to allow roof installers to handle roof shingles installation projects.

If you live in Charlotte and Concord, NC, and you would like to install roof shingles, you need to employ the services of the best roofing company in the area. They will help with the installation process of the roof shingles. They will also help with any other roofing task you may have.

Advanced Roofing and Exteriors offers commercial roofing and residential roofing services to Charlotte, NC, and surrounding areas.